21
How to attach the HDD unit holding bracket
Angle
① Insert the HDD unit holding
bracket into the angle hole.
② Fix the HDD unit holding
bracket with a screw while
sliding it to the left.
HDD unit holding bracket
②
①
When you transport the extension unit
(
1
) Remove all the HDD units in the extension unit or fit the HDD unit holding brackets and fix them with screws.
(
2
) Put the extension unit between the cushions and insert together into the packing box.
Important:
• The extension unit weighs over 10 kg {22.1 lbs}. Be careful not to drop the product when transporting. Dropping may cause
damage, deformation of the extension unit, or injury.
Packing box
Cushion
4
HDD unit (continued)
To Next Page
Loading...
