Panasonic WV-BL200 - Page 5

PRECAUTIONS
1.
-Turn power off and
Do not attempt to disassemble
the camera.
To prevent electric shock, do
not remove screws or cover.
There are no_ user-serviceable
parts inside. Refer servicing to
qualified service personnel.
. Handle this camera with care.
Do not abuse the camera. Avoid
striking, shaking it. The camera
could be damaged by improper
handing or storage.
. Do not expose the camera to
rain or moisture, avoid operation
in wet areas.
Do take immediate action if the
camera should becomes wet.
request
servicing to qualified service
personnel. Moisture can damage
the camera and also create the
danger of electric shock.
4. Never aim the camera at the sun.
Whether the camera is in use or
not, never aim it at the sun or an
extremely bright object as this
could cause smear.
5. Do not use the camera beyond its temperature,
humidity or power source ratings.
(a) Designed for indoor use.
Ambient temperature must not range beyond
—30°C - +60°C.
Avoid using the camera when humidity is
above 90%.
The input power source
must be 240V AC 5bOHz f
for WV-BL200/A and ‘
WV-BL200/B, 220V AC
50Hz for WV-BL200/C
and WV-BL200/G_ or
24V AC 50Hz for WV-
BL204.