Panasonic WV-CF634

22
Attaching the dome cover
1 Align the mark with [|] on the dome cover,
and then install the dome cover.
Mark
Mark [|]
2 Adjust the orientation of the dome cover.
Turn the enclosure clockwise so that the
markalignswith[||].
Turn the dome cover to the left or right
while viewing the monitor so that the light is
notblocked.
Important:
• Besuretoalignthemarkwith[||]when
adjusting the dome cover. Do not apply
excessive force, or you may cause
damage.
3 Turn the dome cover clockwise so that
the mark aligns with [|||].
Mark
Mark