Panasonic WV-CF634

24
Setup menu
Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting
area.
List of setup menu
Setup item Description
CAMERA ID
This item specifies the camera title. The camera title that indicates the camera loca-
tion and other information about the camera is created with alphanumeric characters
and symbol, and then displayed on the screen.
CAMERA Performs the camera operation settings.
SCENE 1/
SCENE 2
Selects a scene file. It is possible to register and save the settings as a scene file in
case that it is necessary to change the settings such when shooting at night.
ALC/ELC
Selects the method of controlling the quantity of light in accordance with the lens to be used.
SHUTTER
Specifies the electronic shutter speed.
AGC
Specifies gain adjustment.
SENS UP
Specifies electronic sensitivity enhancement.
WHITE BAL
Specifies white balance adjustment.
DNR
Selects the level of the digital noise reduction function.
D&N
(ELE)
Performs each setting regarding the black-and-white mode such as switching
betweencolorandblack-and-whiteimages.
VMD
Performs settings regarding VMD (Video Motion Detection)
SYSTEM
Performsthesettingsregardingthecamerasystemsuchassynchronizationandpri-
vacyzone.
SYNC
Specifiesthesynchronizationtype.
PRIVACY ZONE
Hides undesired portions in the camera shooting area.
STABILIZER
Decideswhetherornottoenabletheimagestabilizer.
EL-ZOOM
Switchestheelectroniczoomonandoff.
UPSIDE-DOWN
Flipsthecameraimagesverticallyorhorizontally.
LDC
Adjusts the lens distortion correction to convert the image so that it matches the
square monitor.
BACK-FOCUS
CF634
Selectstheadjustmentmethodandfineadjustmentmethodforbackfocus.
SPECIAL
CHROMA GAIN
Adjusts the chroma level (color density).
AP GAIN
Adjusts the aperture level.
PEDESTAL
Adjusts the pedestal (brightness) level.
HUE Adjusts the chroma phase (hue).
DISPLAY Performs the image display setting.
PIX OFF
Corrects image defects such as flaws.
CAMERA
RESET
Restores the settings in the setup menu to the default settings.
SER.NO.
Displays the serial number of this product.
LANGUAGE Selects a language to be used in the setup menu.