Panasonic WV-CF634

26
Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
Note:
 • If the top screen of the setup menu is
called up with the operation buttons, the
setup mode is always "DISABLE" to
prevent operation errors.
To perform settings in the setup menu,
change the setup mode to "ENABLE".
 • Thecursorisareverselyhighlightedpart.
Step 4
Perform the settings for each item.
•
Selection of setting item:
Press the [UP] button or [DOWN] button to
move the cursor.
•Changeofsettings:
Press the [RIGHT] button or [LEFT] button.
•Displayofadvancedsetupscreen:
Press the [SET] button when " " is
attached to the target setting item.
•Returntoprevioussetupscreen:
Move the cursor to "RET" and press the
[SET] button.
•Returntothetopscreen:
Move the cursor to "TOP" and press the
[SET] button, to display the top screen of
the setup menu.
Step 5
Move the cursor to “END” and press the [SET]
button to return to the camera image screen,
or wait about 5 minutes and the setup menu
will automatically close.
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO1
OFF
VMD
RET TOP END
D&N(IR)