Panasonic WV-CW504S - Image stabilizer setting [STABILIZER]

23
x Remove the enclosure and inner
dome from the main body by loos-
ening the three fixing screws.
Loosen the three fixing screws by using the
provided bit for tamperproof screw.
Detach the inner dome while pushing the
parts with the "PUSH" indication.
Important:
 • Donotholdtheinnerdomewhencarrying
the camera. Otherwise, the camera part
may fall and it may damage the camera.
Note:
 • Performthesameprocedurewhenreplac-
ing with the optional dome cover WV-
CW4S.
c Secure the camera to the bracket
with the camera fixing screw (red, 1
position).
Important:
 • The camera fixing screwshall be securely
tightened. Otherwise, water exposure may
cause damage or malfunction of camera,
or camera dropping may result in injury.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
v Remove the screw (blue, 1 position)
for transport protection with a
Phillips screw driver.
Press the parts with the
"PUSH" indication.
Screw for transport protection (blue)
Camera fixing screw (red)
* The camera fixing screw
shall be securely tightened.