Panasonic WV-NS202A - Standard Accessories

26
Network
Network 10BASE-T/100BASE-TX, RJ45 connector
Resolution VGA (640 x 480)/QVGA (320 x 240)
Image compression method
MPEG-4 Image quality: LOW/NORMAL/FINE
Transmission type: UNICAST/MULTICAST
JPEG Image quality: 0 SUPER FINE/1 FINE/2/3/4/5 NORMAL/6/7/8/9 LOW (10 steps:
0-9)
Transmission type: PULL/PUSH
Refresh interval (MPEG-4) 0.1 fps – 30 fps (Frame rate of JPEG display will be limited when displaying JPEG
and MPEG-4 simultaneously.)
Audio compression method G.726 (ADPCM) 32 kbps/16 kbps
Bandwidth Control 64 kbps/128 kbps/256 kbps/512 kbps/1 024 kbps/2 048 kbps/4 096 kbps/Unlimited
Protocol TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
OS Microsoft
®
Windows
®
2000 Professional SP4, Microsoft
®
Windows
®
XP Home
Edition SP2, Microsoft
®
Windows
®
XP Professional SP2,
Web browser Microsoft
®
Internet Explorer
®
6.0SP2, Microsoft
®
Internet Explorer
®
7.0 (Microsoft
®
Internet Explorer
®
6.0 SP1 only when using Windows
®
2000 Professional SP4)
Maximum concurrent
access number 8 (Depends on network conditions)
FTP client Alarm image transmission, FTP periodic transmission
Multi-screen Images from 16 cameras (4 cameras x 4 groups) can be displayed simultaneously.
SD memory card (option) Manufactured by Panasonic (Performance with this camera has been checked.)
Capacity: 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB
* SD High Capacity (SDHC) card is not compatible with this camera.
Standard Accessories
CD-ROM* ............................................................................................. 1 pc.
Installation Guide (this book) ............................................................... 1 pc.
Warranty ............................................................................................... 1 pc.
* The CD-ROM contains the operating instructions (PDFs) and the software.
The following are for installation.
Mount bracket (w/safety wire) .............................................................. 1 pc.
Fixing screw ...................................................... 2 pcs. (incl. a spare screw)
Decorative cover .................................................................................. 1 pc.
DC 12 V power cord plug .................................................................... 1 pc.
Code label* .......................................................................................... 1 pc.
* It will be needed for network management.
A network administrator should keep this label.
Options
Wall Mount Bracket WV-Q150C, Q150S (weight: Approx. 950 g)
Ceiling Mount Bracket WV-Q151C, Q151S (weight: Approx. 800 g)
WV-Q152C, Q152S (weight: Approx. 230 g)
WV-Q105 (weight: Approx. 150 g)
Inner Cover WV-Q153 (weight: Approx. 50 g)
Important:
When using an optional inner cover WV-Q153, upper side of images will be hidden (become black) when the tilt
angle of the camera is almost level. (When "–5°" is selected for "Tilt Angle" on the setup menu, upper half of
images will be hidden.)
In this case, images will also be washed out depending on the object when "ON" is selected for "AGC" on the
setup menu.
Refer to the network operating instructions (PDF) for further information about the setup menu.