To Next PageTo Next PageWhat to do if my Panasonic WV-X1551LN Security Camera power is not turned on?
If your Panasonic Security Camera isn't powering on, there are a few things to check: * If you're using a PoE (Power over Ethernet) device, ensure the connection is properly established. * Make sure the power plug is firmly connected. * Verify the AC adapter specifications are correct.
General| Camera Type | Network Camera |
|---|---|
| Resolution | 1920 x 1080 |
| Lens Type | Fixed |
| Lens Focal Length | 2.8 mm |
| Focal Length | 2.8 mm |
| Day/Night Functionality | Yes |
| Power Supply | PoE (Power over Ethernet) |
| IR Distance | Up to 30 m |
| IP Rating | IP66 |
| IK Rating | IK10 |
| Power Source | PoE (IEEE802.3af) |
| Operating Temperature | -30°C to +60°C |
| Wide Dynamic Range (WDR) | Yes |
| Sensor Type | CMOS |
| Horizontal Resolution | 1920 pixels |
| Lens Mount | Fixed |
| Compression Format | H.264, MJPEG |
| Audio Support | Yes |
| S/N Ratio | 50 dB |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Angle of View | H: 109°, V: 57° |
Precautions for secure remote access and password management.
Solutions for the camera not turning on, covering PoE and DC power.
Details power source, consumption, operating, and storage environment conditions.
Details image sensor, resolution, illumination, dynamic range, and processing features.
Details zoom ratios, focal length, aperture, focus range, and field of view.
Details network interface, protocols (IPv4/IPv6), and security settings.
Explains image/audio compression and supported OS, browsers, and storage.
