To Next Page
R
Randy BurtonAug 13, 2025
How to turn on indicators on Panasonic Security Camera?
- SsandersonAug 13, 2025
To turn on the indicators, select “On” or “On(Access)” for the indicator setting.
How to turn on indicators on Panasonic Security Camera?
To turn on the indicators, select “On” or “On(Access)” for the indicator setting.
Why Panasonic Security Camera SD ERROR indicator lights red?
The SD ERROR indicator might light up red due to several reasons: * The write protect switch of the SD memory card is set to “LOCK”. In this case, unlock the write protect switch. * The SD memory card was formatted on a PC. Use an SD memory card formatted on the camera instead. * The SD memory card is faulty. Replace the card with a normal one.
How to fix Panasonic WV-X6533LN if power is not turned on?
If your Panasonic Security Camera isn't powering on, here's what to check: * **PoE+ Power Supply:** Ensure the connection is properly established. * **AC Power Supply:** Verify the connection is correctly set up. * **Tested PoE Injector:** Make sure the power lamp on the injector is lit.
What to do if Panasonic Security Camera normal PAN and TILT operations are not made even when the power supply to the camera has been turned on and a sound comes from the camera?
If normal pan and tilt operations are not functioning and a sound is coming from the camera, immediately turn off the power supply. Remove any fixing tape adhered to the horizontal and vertical rotation portions of the camera, and then turn the power on again.
Why does my Panasonic WV-X6533LN start panning unpredictably?
Unpredictable panning in your Panasonic Security Camera can be due to: * **Noise:** Check the surrounding environment for excessive noise. * **High Temperature Protection:** The system might be activating a protection circuit, causing it to automatically pan and tilt to return the screen to the original position.
How to fix Panasonic WV-X6533LN if it is hard to see images with the camera when there are raindrops on the front panel?
If raindrops are hindering image clarity on your Panasonic Security Camera, the rain wash coating's effectiveness may be reduced. Clean the front panel, referring to “Cleaning of the front panel” in “Precautions for use”.
How to fix Panasonic WV-X6533LN if it does not move to the preset positions accurately?
To correct the camera's position if it's not moving accurately to preset positions, execute the position refresh function.
What to do if Panasonic WV-X6533LN Security Camera shows “Now Maintenance Mode” is still being displayed in the screen?
If your Panasonic Security Camera screen is stuck on “Now Maintenance Mode”, it means the camera is still in the “Insert/Remove SD memory card” mode. Click the [Exit] button of [Insert/Remove SD memory card].
General| Maximum Resolution | 1920 x 1080 |
|---|---|
| Optical Zoom | 4x |
| Audio Support | Yes |
| Operating Temperature | -10 °C to +50 °C |
| Dimensions | ø 115 mm x 130 mm |
| Weight | Approx. 1.2 kg |
| Day/Night Function | Yes |
| IR LED | Yes |
| IR Distance | Up to 30 m |
| Weather Resistance | IP66 |
| Vandal Resistance | IK10 |
| Pan Range | 360° |
| SD Card Slot | Yes |
| Sensor Type | MOS |
| Focal Length | 2.8 mm to 12 mm |
| Video Compression | H.264 |
| Power Supply | PoE |
| Tilt Range | 90° |
| Audio Input/Output | 1 x Input, 1 x Output |
| Alarm Input/Output | 1 x Input, 1 x Output |
| Effective Pixels | 2 Megapixels |
| Minimum Illumination | 0.03 lx (Color), 0.005 lx (B/W) |
| S/N Ratio | More than 50 dB |
| Power Consumption | 7.5 W |
| Image Sensor | 1/2.8" MOS Sensor |
| Lens Type | Motorized Varifocal Lens |
