To Next PageTo Next PageHow to access Panasonic WV-SW175 via the Internet?
To access your Panasonic Security Camera via the Internet, ensure that the camera's network settings, including the default gateway and DNS server address, are correctly configured. If using DDNS, verify those settings as well. Also, if your router doesn't support UPnP, you'll need to configure port forwarding to enable external access to the camera.
General| Total megapixels | 1.3 MP |
|---|---|
| Maximum resolution | 1280 x 960 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264 |
| Analog signal format system | NTSC, PAL |
| Supported graphics resolutions | 1280 x 960, 640 x 480 (VGA) |
| Pan range | -47.5 - 47.5 ° |
| White balance | Auto |
| Tilt angle range | -45 - 10 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/10000 s |
| Minimum illumination | 0.5 lx |
| Sensor type | MOS |
| Progressive scan | Yes |
| Optical sensor size | 1/4 \ |
| Optical zoom | 16 x |
| Normal focusing range | 0.5 m |
| Built-in HDD | - |
| Flash memory | 32768 MB |
| Compatible memory cards | SD, SDHC |
| Type | IP security camera |
| GPS (satellite) | No |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Dome |
| Product color | Silver |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Cabling technology | 10/100Base-T(X) |
| DC output voltage | +12V |
| Power consumption | 430 mA |
| Power source type | PoE |
| AC input frequency | 50 - 60 Hz |
| Cables included | LAN (RJ-45) |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| F-number (relative aperture) | 2.2 |
Weight and Dimensions| Width | 100 mm |
|---|---|
| Height | 74 mm |
| Weight | 350 g |
Explains the structure of the user manuals and how to use them.
Instructions for viewing images from a single camera on a PC.
Explains the interface and functions of the "Live" page for monitoring camera feeds.
Details how to display images from multiple cameras simultaneously on a multi-screen.
Guides users on viewing camera images via a cellular phone.
Instructions for viewing camera images on mobile terminals like smartphones or tablets.
Describes the different categories or types of alarms that can trigger camera actions.
Explains specific actions the camera takes when an alarm occurs.
Details sending images automatically to FTP when an alarm is triggered.
Explains how to configure scheduled image transfers to an FTP server.
Describes saving images to SD card if FTP transmission fails.
Details the components and navigation of the log list window.
Explains the interface and controls for the image playback feature.
Instructions for downloading H.264 video data recorded on the SD memory card.
Details the various security functions provided by the camera for network protection.
Step-by-step guide on accessing the camera's configuration menu from a PC.
Instructions on how to navigate and use the various options within the setup menu.
Provides an overview of the setup menu interface and its main sections.
Details how to set fundamental camera parameters like title, date, and time.
Explains how to configure settings for using the SD memory card for recording.
Instructions on how to copy images from the SD memory card to a PC.
Details how to configure the logging settings for alarms, manual/schedule, and FTP errors.
Explains log and image saving behavior based on alarm settings and SD card configuration.
Details log and image saving behavior for manual/schedule operations.
Explains log and image saving behavior when FTP errors occur.
Explains how to set the aspect ratio for JPEG and H.264 image formats.
Details settings for JPEG images, including refresh interval, capture size, and quality.
Explains how to configure settings specific to H.264 video streams.
Details settings for MPEG-4 video streams.
Explains how to configure camera operations like home position and self-return.
Covers settings for image quality, preset positions, and camera movement functions.
Covers configuration for audio transmission and reception settings.
Explains how to define camera actions in response to different types of alarms.
Details specific camera actions triggered by various alarm types.
How to configure preset positions to be triggered by specific senders for command alarms.
Explains how to configure alarm images for FTP transmission.
Details H.264 recording settings on SD memory card when an alarm occurs.
Explains how to configure the camera's alarm output terminals.
How to customize the names for AUX related functions.
Covers configuration of Video Motion Detection (VMD) areas and settings.
Details how to configure email notifications for alarms and system events.
Explains how to configure notifications using Panasonic's alarm protocol.
Details configuration for sending image recognition data (auto track, face detection) via XML.
Explains how to enable and configure the face detection feature.
Details how to set up user authentication for accessing the camera.
Explains how to configure host (PC) authentication for camera access.
Details priority stream settings to maintain image quality during concurrent user access.
Details how to configure the mail server settings for sending alarm emails.
Details essential network settings like IP address, subnet mask, and gateway.
Explains how to configure HTTPS for secure network access.
Steps to access the camera securely using the HTTPS protocol.
Explains how to configure Dynamic DNS settings for remote internet access.
Details how to configure Simple Network Management Protocol settings for camera status monitoring.
Explains how to set up scheduled image transfers to an FTP server.
Details how to schedule FTP image transmission based on days and times.
Step-by-step guide on setting up transmission schedules.
Instructions on how to remove or delete existing transmission schedules.
Detailed steps for manually configuring wireless network settings on the camera.
Guides on automatically connecting the camera to a wireless router using WPS.
Details how to configure Wireless Quality of Service settings for H.264 RTP transmission.
Explains how to check the camera's wireless connection status and information.
Guides on how to view and interpret system logs for troubleshooting.
Instructions for updating the camera's firmware to the latest version.
Explains how to reset camera settings to default or reboot the device.
Overview of the CD-ROM launcher interface and its functions.
Guides on installing the Panasonic IP Setting Software for network configuration.
Instructions for installing the product manuals from the CD-ROM.
Steps to install the Viewer software for displaying camera images.
How to configure camera network settings using the IP Setting Software.
