
Do you have a question about the Panasonic WV-SW316L and is the answer not in the manual?
| Camera Type | Network Camera |
|---|---|
| Frame Rate | 30 fps |
| Lens | Fixed |
| Focal Length | 2.8 mm |
| IR Night Vision | Yes |
| IR LED | Yes |
| Day/Night Function | Yes |
| Wide Dynamic Range (WDR) | Yes |
| Back Light Compensation (BLC) | Yes |
| Digital Noise Reduction (DNR) | Yes |
| Audio Compression | G.711, G.726 |
| Ethernet | 10Base-T / 100Base-TX |
| Wireless | No |
| Weather Resistance | IP66 |
| Vandal Resistance | IK10 |
| Resolution | 1920 x 1080 |
| Video Compression | H.264 |
| SD Card Slot | Yes |
| Power Supply | PoE (IEEE802.3af compliant) |
| Operating Temperature | -10°C to +50°C |
| Image Sensor | 1/3" MOS Sensor |
Compensates brightness for clearer images under varying illumination.
Supports dual stream output (H.264/MPEG-4) and JPEG output simultaneously.
Allows automatic focus adjustment via camera buttons or setup menu.
Automatically switches to B&W mode in low light for clear night images.
Zoom ratio adjustable via unit buttons and setup menu for specific areas.
Features an infrared LED for shooting at zero lux illumination.
Receives power via a single LAN cable, compliant with IEEE802.3af.
Enables audio reception and transmission between cameras and PC via connectors.
Allows saving video/images to card manually or during events.
Specifies minimum processor speed for optimal camera operation.
Lists required RAM for different operating systems.
Details required network card specifications (10BASE-T/100BASE-TX).
Lists compatible Windows OS versions (7, Vista, XP SP3).
Lists supported web browsers (Internet Explorer versions).
Identifies risks like information leakage and malicious use.
Outlines measures like using firewalls and strong passwords.
Emphasizes technique, dealer consultation, and proper installation.
Advises immediate shutdown and professional service for issues.
Warns against disassembly, which can cause fire or shock.
Advises against inflammable atmosphere, salt damage, and vibration.
Stresses secure mounting and proper screw tightening.
Guidance on selecting a strong and suitable installation location.
Lists unsuitable locations like chemical areas or high vibration zones.
Recommends using a power supply with an ON-OFF switch.
Advises on network wiring and pan/tilt head compatibility.
Details proper screw tightening techniques and tool usage.
Informs that fixing screws are not supplied and must be prepared.
Identifies front cover, sunshield, and lock screws on the camera body.
Illustrates network, alarm, power, and audio cables connected to the camera.
Shows the accessory used for mounting the camera.
Details buttons like SD card error, AF, Link, TELE, WIDE, and Initial set.
Details buttons like Access/Link indicators, Focus assist, and Initial set.
Shows IR LED, Lens, Lens cover, Packing, Monitor output jack for WV-SW316L.
Shows Lens, Focus lock knob, Zoom lock knob, Packing, Lens cover for WV-SW314.
Specific warning for UL listed models regarding power supply connection.
Guidance on mounting bracket and preparation of mounting screws.
Details screw torque, pull-out capacity, and structural reinforcement needs.
Instructions on loosening, adjusting, and tightening tilt lock screw.
Steps for passing cables and safety wire through the mount bracket.
Emphasizes firm securing of camera fixing screws and recommended torque.
Instructions for securing safety wire and clamping cables with screws.
Details connecting microphone/line input cable and applicable microphone.
Instructions for connecting an external speaker to the audio output cable.
Details terminal names, ratings, and 4P alarm cable specification.
Instructions for connecting the LAN cable to the network connector.
Covers connecting 12V DC power supply or PoE device.
Describes winding tape on LAN cable for waterproofing.
Covers waterproofing alarm, power, microphone, and audio cables.
Provides detailed instructions on stretching and winding the tape correctly.
Illustrates connection of camera, PC, and speakers via PoE hub.
Highlights monitor usage, hub compliance, and power supply requirements.
Instructions for securing bracket to wall or junction box.
Steps to secure the adapter box accessory to a wall or junction box.
Details securing adapter box mounting screws and recommended torque.
Instructions for attaching camera mount bracket to adapter box hinges.
Advises selecting hinges to avoid interference with bracket motion.
Instructions for securing mount bracket cover with screws and recommended torque.
Advises power off before insertion/removal and selecting "Not use".
Steps to loosen fixing screws and remove the front cover.
Instructions for inserting the card until a click is heard.
Steps for reattaching the front cover after memory card operations.
Recommends using a monitor for adjusting camera angle.
Steps to remove the front cover using fixing screws.
Details connecting monitor output jack to monitor with RCA cable.
Guides on loosening lock screws and rotating camera head for adjustment.
Emphasizes securely tightening panning and tilting lock screws.
Instructions for adjusting view angle based on subject distance.
Using TELE/WIDE buttons to adjust field of view.
How to use the AF button for automatic focus adjustment.
Warnings about touching lens and defocus from front cover.
Using focus ring and zoom lock knob for adjustment.
Notes on focus adjustment when zoom ring is at W or T end.
Detailed steps for using the focus assist button for optimal adjustment.
Warnings about defocus with dome cover and subject presence.
Instructions for mounting the front cover using 4 fixing screws.
Attaching desiccant and mounting front cover for WV-SW314.
Notes on desiccant, torque, sequence, and packing.
Steps to remove sunshield and tripod head fixing screws.
Instructions for loosening screw, removing rear cover and cap.
Steps for hooking rear cover to front cover via attachment holes.
Securing tripod head with mounting screws removed earlier.
Instructions for securing camera with fixing screws and routing cables.
Emphasizes using correct screws and recommended torque.
Instructions for removing the rear part of the sunshield.
Attaching sunshield using mounting screws and aligning protrusions.
Advises using correct screws and torque for sunshield.
Explains how to start the CD launcher and accept the license agreement.
Lists actions like installing software, manuals, and viewing manuals.
Click "Install" on CD launcher for IP setting software.
Details selecting software, shortcut location, folder, and starting install.
Instructions on how to uninstall the software by deleting shortcut and folder.
Steps to select manuals, models, shortcut location, and folder for installation.
How to uninstall manuals by deleting shortcut and folder.
Instructions to install Viewer software from CD launcher for camera image display.
Steps to uninstall Viewer software via Control Panel for different OS versions.
Explains using IP setup software for camera network configuration.
Steps to launch software from CD launcher or shortcut.
Selecting camera and clicking Network Settings to configure.
Information on DHCP, duplicate IP addresses, and camera access.
Filling network setup items and saving settings.
Advises allowing access to all UDP ports when using a firewall.
Specifies default admin credentials and importance of changing them.
Solutions for power issues related to DC supply and PoE.
Addresses blurred images due to IR LED reflection and angle adjustment.
Explains issues with IR LED switching between color and B&W modes.
Covers power source, consumption, and voltage requirements.
Details ambient operating temperature, humidity, and IR distance.
Specifies waterproof grade and monitor output signal type.
Specifies microphone/line input, audio output, and product dimensions.
Describes material finish and temperature-related operational notes.
Details image sensor type and effective pixel count.
Lists minimum light levels for color and BW modes for different models.
Information on Super-Dynamic feature and dynamic range.
Settings for shutter speed and auto slow shutter function.
Details zoom ratios and focal lengths for different models.
Specifies aperture ratios for WIDE and TELE settings.
Provides horizontal and vertical viewing angles for different models.
Dimensions and adjusting angles for the camera mount bracket.
Details network connection type and supported resolutions (H.264, MPEG-4, JPEG).
Covers image quality, compression methods, and transmission types.
Lists bandwidth control options and supported network protocols (IPv4, IPv6).
Compatible OS, browsers, and FTP client capabilities.
Capability to display up to 16 camera images simultaneously.
Lists compatible SDHC and SD memory card sizes.
Details compatibility with mobile devices like iPad, iPhone, Android.
Lists items like Installation Guide, CD-ROM, cables, screws, and desiccant.
Lists user license accessories for MPEG-4 and H.264.
Mentions the Adapter Box as an optional accessory.
Symbol meanings and instructions for proper disposal of electronics and batteries.
Provides contact details for Panasonic support in U.S., Canada, and Europe.












Loading...