Panasonic WV-SW316L

25
Secure the camera mount bracket when the camera is directly
installed on a wall
Use 4 screws (locally
procured) to secure the
camera mount bracket to a
wall or a junction box (locally
procured).
 • Ifajunctionboxisused,
putting the boxes side by
side is recommended as
illustrated.
(Use unused
junction boxes to pass
cables through for easy
cabling.
)
When the camera is installed on a wall using the adapter box
(E model only)
z
Use 4 screws (locally
procured) to secure the
adapter box (accessory) to a
wall or a junction box (locally
procured).
Camera mount bracket
83.5 mm {3-1/4"}
46 mm
{1-13/16"}
Mounting screw x4
(locally p
r ocured)
Cable access hole
6 mm (W) x 10 mm (L) {1/4" (W
) x
3/8" (L)} (long hole)
20 mm
{13/16"}
46 mm {1-13/16"}
Unused
junction boxes
6 mm (W) x 10 mm (L) {1/4" (W) x 3/8" (L)} (long hole)
83.5 mm
{3-1/4"}
Camera mount bracket
Mounting screw x4
(locally procured)
Junction boxes
46 mm
{1-13/16"}
View from above (internal)
20 mm {13/16"}
83.5 mm {3-1/4"}
Cable access hole (used for wiring)
(G3/4" internal thread)
Mounting screw x4
(locally procured)
Cable access hole
Adapter box (accessory)
6 mm (W) x 10 mm (L)
{1/4" (W
) x 3/8" (L)}
(long hole)
TOP