Panasonic WV-SW316L

40
Configure the network settings of the camera using the
Panasonic IP setting software
ItispossibletoperformthenetworksettingsofthecamerausingtheIPsetupsoftwareonthepro-
videdCD-ROM.Whenusingmultiplecameras,itisnecessarytoconfigurethenetworksettingsof
eachcameraindependently.
IfthePanasonicIPsettingsoftwaredoesnotwork,configurethenetworksettingsofthecamera
and the PC individually on the "Network" page of the setup menu. Refer to the Operating
Instructions(includedintheCD-ROM)forfurtherinformation.
IMPORTANT:
 • When using Microsoft Windows 7 or MicrosoftWindows Vista, the "Windows Security Alert"
window may be displayed when starting the IP setup software. In this case, disable "User
AccountControl"fromthecontrolpanel.
 • Forthesecurityenhancement,theMACaddress/IPaddressofthecameratobeconfiguredwill
notbedisplayedwhenaround20minuteshavepassedafterturningonthepowerofthecam-
era.(Whentheeffectiveperiodissetto"20min"intheIPsetup)
  Howevercamerasintheinitialsetmodearestilldisplayedevenafter20minutes.
 • PanasonicIPsettingsoftwareisinoperableinothersubnetsviathesamerouter.
 • ThiscameracannotbedisplayedorsetwithanolderversionoftheIPsetupsoftware(version2.xx).
z TostartthePanasonicIPsettingsoftware,clickthe[Run]buttonnextto[IPSettingSoftware]
fromtheCDlaunchermenuwindow,ordouble-clickontheshortcuticoncreatedafterinstall-
ingthesoftwareonthePC.
 • TheLicenseAgreementwillbedisplayed.Read
the Agreement and choose "I accept the term
in the license agreement", and click [OK].
x Clickthe[NetworkSettings]buttonafterselect-
ingtheMACaddress/IPaddressofthecamera
tobeconfigured.
Note:
 • WhenusingaDHCPserver,theIPaddressassignedtothecameracanbedisplayedbyclickingthe
[Search]buttonoftheIPsettingsoftware.
 • WhenaduplicateIPaddressisused,thecorrespondingcameranumberwillbedisplayedshaded.
 • Whenthe[AccessCamera]buttonisclicked,liveimagesoftheselectedcamerawillbedisplayed.
 • Itispossibletochangethe"Cameralist"displaybetweenIPv4addressesandIPv6addressesin
accordancewiththeprotocolinuse.
 • Theinformationdisplayedcanbesortedbyclickingthetitleofeachdisplayeditem.
Configure the network settings