Why does the authentication window appear repeatedly on my Panasonic WV-SW559 Security Camera?
To resolve the repeated display of the authentication window on your Panasonic Security Camera, if you've changed the authentication settings, close the web browser and access the camera again. If the username or password was changed, note that the authentication window will appear each time the screen is refreshed or changed.
How to troubleshoot 'Cannot access from the web browser' on Panasonic Security Camera?
If you cannot access your Panasonic Security Camera from a web browser, start by checking the LAN cable connection (category 5 or better, STP* for E models). Ensure it's firmly connected to the camera's network connector. Verify the link indicator is lit; if not, the LAN connection may be faulty. Also, check that the camera is powered on and the IP addresses are correctly configured. If connected to the same subnet, ensure the camera and PC IP addresses are in a common subnet, and proxy settings are correctly configured. If connected via different subnets, verify the default gateway IP address setting for the camera.
What to do if I cannot access my Panasonic WV-SW559 via the Internet?
If you are unable to access your Panasonic Security Camera via the Internet, ensure that the default gateway or DNS server address is correctly set in the camera's network settings. Also, verify that the 'Default gateway' setting is configured on the 'Network' page.
How to fix 'Cannot access the camera from a cellular phone' issue on Panasonic WV-SW559?
If you cannot access the Panasonic Security Camera from a cellular phone, first, check that the URL is entered correctly and includes '/mobile' at the end. If you're still having trouble, verify that the SSL encryption method matches the camera's settings. Select 'HTTP' (and not 'HTTPS') under 'HTTPS' - 'Connection' on the 'Network' page - the [Network] tab, and try accessing the camera again.
Why is no image displayed from my Panasonic Security Camera?
If no image is displayed from your Panasonic Security Camera, verify that the viewer software is installed on your PC. Also, confirm that your version of DirectX® is 9.0c or later; if it's older, upgrade it.
What to do if I cannot obtain images on the SD memory card of my Panasonic Security Camera?
If you are unable to obtain images on the SD memory card of your Panasonic Security Camera, ensure that 'Allow' is selected for 'FTP access to camera' on the [Network] tab of the 'Network' page. Also, restart the web browser and re-enter the password to ensure it is correct.
How to stop screen flicker on my Panasonic WV-SW559?
To resolve flickering on the screen of your Panasonic Security Camera, select 'Indoor scene' for 'Light control mode'.
How to troubleshoot audio transmission issues with my Panasonic Security Camera?
To troubleshoot the 'Cannot transmit audio to the camera' issue with your Panasonic Security Camera, check that the microphone and speaker are connected correctly and firmly.
Why does user registration for 'Viewnetcam.com' service fail for my Panasonic Security Camera?
To resolve a failed user registration for the 'Viewnetcam.com' service with your Panasonic Security Camera, visit the 'Viewnetcam.com' website to register the correct E-mail address.
What to do if I cannot access my Panasonic WV-SW559 via the URL of the “Viewnetcam.com” service?
To address the issue of being unable to access your Panasonic Security Camera via the URL of the “Viewnetcam.com” service, log into the 'My Account' page of 'Viewnetcam.com' website to check the information of the registered camera.
General| Camera Type | Network Camera |
|---|---|
| Image Sensor | 1/3" MOS Sensor |
| Video Compression | H.264, JPEG |
| Frame Rate | 30 fps |
| Audio Compression | G.711, G.726 |
| Wireless | No |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Max Resolution | 1280 x 960 |
| Effective Pixels | Approx. 1.3MP |
| Day/Night Functionality | Yes |
| Wide Dynamic Range | Yes |
| Audio Support | Yes |
| Network Interface | 10Base-T / 100Base-TX, RJ45 |
| Power Supply | PoE (IEEE 802.3af compliant) |
| Operating Temperature | -10 °C to +50 °C (+14 °F to +122 °F) |
| Weight | Approx. 800 g (1.76 lbs) |
To Next Page
