Pandora Light Pro Manual

12 SECURITYSERVICE SYSTEM PANDORA LIGHT PRO
Charging the remote control
•Batteryischarged
•Batteryisdischarged
There is battery charge level indication on the display of the remote control. Charge the battery if
the remote control doesn’t turn on or the charge indicator displays low level. Charging is performed
using a standard micro-USB cable.
Firmware update
• Run the Pandora Alarm Studio application on a PC and connect a USB-cable to it.
• Press and hold the
, button and connect a USB cable. Release the button after connection. The
remote control and the app will enter boot mode.
• Upload firmware, disconnect the USB-cable after completion of the procedure.
NOTE! ThE alarmsTudiO applicaTiON is prOvidEd ONly TO auThOrizEd iNsTallErs Of paNdOra. iT is availablE ON Our
wEb-siTE paNdOraiNfO.cOm

Pandora Light Pro Specifications

General

Brand	Pandora
Model	Light Pro
Category	Car Alarm
Language	English