Pandora Light Pro Manual

24 SECURITYSERVICE SYSTEM PANDORA LIGHT PRO
signals will flash 4 times.
NOTE! yOu caN ENablE “prOhibiT disarmiNg whEN a Tag is absENT” fuNcTiON iN ThE sysTEm sETTiNgs. if This mOdE is
ENablEd, ThE sysTEm caN bE disarmEd ONly if a Tag is iN ThE radiO cOvEragE zONE Or by ENTEriNg ThE “sEcrET piN-cOdE”.
T
hE mOdE is disablEd by dEfaulT, usE ThE paNdOra alarmsTudiO Or mObilE app TO ENablE iT.
To disarm the system, use one of the methods described below. The system will confirm the
command with 2 short sound signals and 2 flashes of turn indicators.
doors are unlocking
system is disarming
2x /2x
/2x
SLAVE
HANDS FREE
MOBILE APP
Remote control
To disarm the system, shortly press
button on the remote control when you are in the radio
coveragezone.Theremotecontrolwillplay“DISARMING”ringtoneandsecuritymodestatusicon(the
lock) will change to
.
To arm the system without sound confirmation press and hold
button for 1 second or more.
Radio tag
A radio tag must be in the Bluetooth coverage area. Shortly press the control button on the tag.
SLAVE mode
This mode allows disarming using special analog inputs or digital connections to a car.
Todisarmthesystem,shortlypressthe“Unlock”buttononanoriginalremotecontroloruseasensor/button
on a door handle (for cars with an intelligent access system).
NOTE! addiTiONal sETTiNgs Or cONNEcTiONs arE rEquirEd fOr This mOdE.
Mobile application
Open the mobile application. When the system is online (you are in the radio coverage area), press and
hold the button
on the control panel until the scale is fully loaded.

Pandora Light Pro Specifications

General

Brand	Pandora
Model	Light Pro
Category	Car Alarm
Language	English