32
SYMBOL FUNCTION
In addition to the letters, symbols and numerals on the key tops, there are 9 additional marks
available with the symbol function. These symbols are shown below.
To type in a symbol:
1 Press . A row of symbols appears in the display.
2 Press or until the desired symbol flashes.
3 Press . The symbol appears in the text.
☞ To type in a series of symbols, hold down before pressing . Then,
continue adding symbols by selecting them as explained in steps 2 and 3, and
holding down while pressing . Press just after selecting the
last symbol in the series.
Symbols
+=
Da ta F ax
Fiber
Optic
Phone Plus Equals Caution
Shock
Hazard
Ground
Feed
Sym.
File
Code
File
Code
File File
To Next Page
Loading...
