Panduit LS7 - Serialization Function

45
SERIALIZATION FUNCTION
This function can be used to print many copies of the same text while increasing a certain
value in the text after each label is printed. This type of automatic incrementation is very use-
ful when printing serial number labels, patch panel labels or other labels requiring ascending
codes.
To use the numbering function:
1 Hold down and press . The message “SERIALIZE NUMERIC”
appears in the display. Continue to hold down
and
press
to toggle
between NUMERIC and ALPHABETIC serialization.
2 When you release
, the message “START VALUE” appears in the dis-
play. Type the number or letter of the first value to be printed and press .
3 The message “END VALUE” appears in the display.
Type the number or letter of
the last value to be printed and press .
4 The message “INCR EM ENT BY” appears in the display.
Type the number of the
increment value desired and press .
5 The serialization will be denoted on the display as a “Ω
ΩΩ
Ω" for a one digit serialization
and “ΩΩ
ΩΩΩΩ
ΩΩ“ for a two digit serialization.
☞ Check your cassette before printing a large serialization to ensure sufficient tape is
available.
To print a four position patch panel label for Building A:
1 Position the cursor next to the “A”.
Code
V
S
erializ
e
Code
V
Serializ
e
Code
File
File
File
Caps
Length
Rotate A
A
A
A A Auto
Underline
Frame
Repeat
Legend
1: A _