Pantum BM5100ADN Series - Duplex Copy; ID Card Copying Setting

96
8.4.8. Duplex copy
You can use flat plate and ADF for Auto Duplex copy, ADF supports auto duplex copy.
There are 4 modes in total for duplex copying:
1. One-sided → One-sided:
2. One-sided → Two-sided:
3. Two-sided → One-sided:
4. Two-sided → Two-sided:
8.5. ID card copying setting
For better copying effect, you can enter the “ID Card Copy Settings” menu to change relevant
settings.
1. Press "ID Card Copy" and then "Menu" on control panel to enter the "Menu Settings"
interface.
2. Press "OK" to enter the "ID Card Copy Settings" interface.
3. Press “direction key to select option to be set and press “OK key” to set option.