Pantum BM5100ADN Series - General Settings; System Settings; Ink Saving Setting

124
11. General Settings
This Chapter mainly introduces some general settings.
Note:
• The panel appearance may be a little different due to difference in type or function. All
diagrams are only for reference.
11.1. System Settings
11.1.1. Ink saving setting
You can select the save toner mode which can reduce toner consumption and reduce printing
cost. When save toner mode is “on”, the printed color will be lighter. Save toner mode is “off” by
default.
1. Press "Menu" to enter the menu setting interface.
2. Press "▲" or "▼" to select “System set” and then press "OK".
3. Press "▲" or "▼" to select "Toner save set" and then press "OK" to enable/disable the Ink
Saving mode.