Pantum BM5100ADN Series User Manual

IV
Safety Warning
Please note the following safety warnings before using the printer:
Warning
There is high-voltage electrode inside the printer. Before cleaning the
printer, make sure the power is turned off!
Plugging and unplugging the power cord plug with a wet hand can result
in an electric shock.
The fuser unit is hot when and after printing. Touching the fuser unit (the
shaded area as shown) may cause burns!
The fuser unit is attached with a high temperature warning label. Please
do not remove or damage this label.

Pantum BM5100ADN Series Specifications

General

Brand	Pantum
Model	BM5100ADN Series
Category	Printer
Language	English