VII
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
29. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
30. The power consumption of the product with wireless function is 5W/without wireless function is
2W in networked standby if all wired network ports are connected and all wireless network ports are
activated.
31. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
32. Administrative Regulations on Low Power Radio Waves Radiated Devices.
For any certified low-power RF devices, any company, firm, or user is not allowed to change the
frequency, increase the power, or change the characteristics and functions of the original design
without approval.
The use of low-power RF device shall not affect flight safety and interfere with legal communication;
if interference is found, it shall be immediately deactivated and improved until no interference is
required.
Legal communication in the preceding paragraph refers to radio communications operating in
accordance with the provisions of the Telecommunications Act.
Low-power RF device must withstand interference from legal communications or radiological
electrical equipment for industrial, scientific, and medical use.
33. The operations near the radar system shall not be influenced.
The directed antenna with high gain must apply to the fixed point-to-point system only.
34. Please keep this User Guide properly.
To Next Page
Loading...
Need help?
General