Pantum P2210 Series User Manual

8
2.2. Special Paper
This printer supports using the special paper for printing. Special paper includes: label, envelope,
transparency, thick, cardstock, etc.
Note:
• When using special paper or print media, be sure to select matched print type and size in
the print settings so as to get the best print effect.
• When using special media to print, it is recommended to load one piece of paper at one
time.
| Please observe the following standards:
Types of Print
Media
Correct Practices
Incorrect Practices
Label
Use labels with no exposed lining paper only.
Labels shall be put flat when using.
Use labels of full sheet only.
There is no guarantee that all the labels in the
market can meet corresponding requirements.
Use wrinkled, blistering or damaged
labels.
Envelope
Envelopes should be loaded evenly.
Use wrinkled, nicked, stuck or
damaged envelopes.
Use envelopes with clips, snaps,
Windows, or coated linings.
Use envelopes with self-adhesive
stickers or other synthetic materials.
Transparency
Use only transparencies approved for use in
laser printers.
Use transparent print media that is
not suitable for laser printers.
Thick,
Cardstock
Use only heavy paper that is approved for use
in laser printers and meets the weight
specifications of this printer.
Use paper whose weight exceeds the
recommended media specifications of
this printer.

Pantum P2210 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Operating Systems Compatibility	Windows, Linux, MacOS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8s
Supported Media Types	Plain, Thick, Thin, Cotton, Color, Preprinted, Recycled, Bond, Label, Card, Envelope
Supported Media Sizes	A4, A5, A6, Letter, Legal, Executive
Supported Media Weight	60~163g/m²
Power Consumption	Average: 370W