Pantum P2210 Series User Manual

63
9.3. Restore Factory Settings
To reset all parameter settings of products, you can conduct Restore Factory Settings. Specific
steps: when the product power supply is turned off, press and hold "Cancel/Continue" button.
Power on the product until two LEDs flash orange simultaneously. Release the button until the
printer is back to Ready status to finish resetting.
9.4. Consumable information
You can check consumable information through the Printing Info page on the printer control panel
(Please see Chapter 9.1.1.3 for printing method of Printing Info page.)

Pantum P2210 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Operating Systems Compatibility	Windows, Linux, MacOS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8s
Supported Media Types	Plain, Thick, Thin, Cotton, Color, Preprinted, Recycled, Bond, Label, Card, Envelope
Supported Media Sizes	A4, A5, A6, Letter, Legal, Executive
Supported Media Weight	60~163g/m²
Power Consumption	Average: 370W