Pantum P2210 Series User Manual

69
11. Troubleshooting
Please read this section carefully. It can help you solve common trouble in the printing process. If
the problems appeared cannot be solved, please contact Pantum Aftersales Service Center.
Prior to handling common trouble, first check that:
• The power cord is connected correctly and the printer is powered on.
• All of the protective parts are removed.
• The laser toner cartridge is correctly installed.
• The output bin is fully closed.
• The paper is correctly loaded into the tray.
• The interface cable is correctly connected between the printer and the computer.
• The correct printer driver is selected and installed properly.
• The computer port is properly configured and is connected to the proper printer port.
11.1. Clearing Jammed Paper
Note:
• Remove the jammed paper in accordance with the following steps, close the upper cover
and tidy the paper in the tray, then the printer will automatically resume printing. If the
printer cannot automatically start printing, please press the button on the control panel.
• If the printer still does not start printing, please check whether all the jammed paper inside
the printer are cleared.
• If you cannot remove the jammed paper yourself, please contact your local Pantum
authorized repair center or send the printer to the nearest Pantum authorized service
center for repair.

Pantum P2210 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Operating Systems Compatibility	Windows, Linux, MacOS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8s
Supported Media Types	Plain, Thick, Thin, Cotton, Color, Preprinted, Recycled, Bond, Label, Card, Envelope
Supported Media Sizes	A4, A5, A6, Letter, Legal, Executive
Supported Media Weight	60~163g/m²
Power Consumption	Average: 370W