Pantum P2210 Series User Manual

67
10.2.3. Replace Laser Toner Cartridge
Note:
before replacing the laser toner cartridge, please pay attention to the following:
• The laser toner cartridge surface may contain toner. Please remove it carefully to avoid
spilling.
• Put the removed laser toner cartridge on a piece of paper to avoid the toner from
accidently spilling.
• After removing the protective cover, please immediately install the laser toner cartridge
into the printer, so as to avoid photosensitive drum damage caused by exposing to too
much direct sunlight or indoor light.
• While installing the laser toner cartridge, do not touch the surface of the photosensitive
drum so as not to scratch it.
Replacement steps are as follows:
1. Open the upper cover, and remove the empty laser toner cartridge along the guides.
2. Open the package of a new laser toner cartridge, hold the handle of the cartridge and gently
shake around 5-6 times, so as to make the toner evenly distributed inside the cartridge.

Pantum P2210 Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Memory	128 MB
Connectivity	USB 2.0
Input Capacity	150 sheets
Output Capacity	100 sheets
Operating Systems Compatibility	Windows, Linux, MacOS
Dimensions	337 x 220 x 178 mm
Weight	4.75 kg
First Print Out Time	Less than 7.8s
Supported Media Types	Plain, Thick, Thin, Cotton, Color, Preprinted, Recycled, Bond, Label, Card, Envelope
Supported Media Sizes	A4, A5, A6, Letter, Legal, Executive
Supported Media Weight	60~163g/m²
Power Consumption	Average: 370W