Note： • If the printer you need to connect is not in the list of
printers searched,please click “Refresh” to search again.
• If you want to install printer driver in the name of host, please
tick the “Printer Name” you need to connect and “Install the printer
from the list with a hostname”.
• If IP address or host name is added manually, you need to know the IP
address of the printer connected or host name. If they are not made clear,
please print the “NetConf Pg” and view “IP Address” and “Host
name” (Please refer to Chapter 9.4).
8.The system starts to install driver, and it may take several minutes.
9.After installation is finished, “Installation Complete” interface will pop out, and it will be closed
automatically in about 3s.
To Next Page
Loading...
