7.2.Print Settings
You can set up printing parameters with the following two methods before
sending printing work (such as paper type, paper size and paper source).
Operating
system
Temporary printing
setup change
Permanent default
setup change
Windows 7
1. Click “File” menu – “Print”
– “Select printer" -“Printer
properties” (the detailed steps
may differ because of multiple
operating systems).
1.
Click “Start” menu- “Control Panel”
– “Devices and Printers”.
2.
Right click on the printer icon,
select “Printing preference” and
then change setup and save it.
Mac OS
1.
Click “File”
menu – “Print”.
2.
Change setup in the
window popping out.
1.
Click “File” menu – “Print”.
2.
Change setup in the window
popping out and click to save the
preset. (Select preset every time
before printing, or print according
to default setup.)
Note： • Priority of App setup is senior to printer setup.
7.3.Cancel printing
The current printing work can be cancelled in printing process.
As for printers with LCD control panel, the current printing work can be cancelled
by pressing “Cancel”; as for printers with LED control panel, the current printing work
can be cancelled by pressing the “Cancel” key for more than 2s.
7.4.Printing Mode
7.4.1.Printing with the Automatic Feeder Tray
Before printing, please make sure mediums of corresponding quantity have been
installed inside the auto feed tray, and there is no printing medium in the manual
fed tray.
The printer can print with auto feed tray and manual feed tray.
The defaulted state is auto selection, and if there is printing medium in the
manual feed box, papers in manual feed tray will be used with priority.
To Next Page
Loading...
Need help?
General