6.After wireless network setup succeeds, the installation program will search
for printer automatically, and it may take a while.
7.Select the printer needs to be connected and click “Next”.
Note： • If the printer you need to connect is not in the list of printers
searched, please click “Refresh” to search again.
• If you want to install printer driver in the name of host, please tick the
“Printer Name” you need to connect and “Install the printer from the
list with a hostname”.
•
If IP address or host name is added manually, you need to know the IP
address of the printer connected or host name. If they are not made clear,
please print the “NetConf Pg” and view “IP Address” and “Host
name” (Please refer to Chapter 9.4).
To Next Page
Loading...
Need help?
General