Copyright © ParTech, Inc. 2013. All Rights Reserved.Page 8 6/13/2013
Modifying Pixel32.ini
Edit \PixelPOS\pixel32.ini and add a section for each terminal. For example, if you have six
stations, you would need to have six station sections in the INI file.
Make sure that each station section for an EverServ 500 terminal has the following lines under
its heading. Station 1 is shown below.
[STATION1]
PoleDeviceName=FTLDSO
PoleDisp=DLLS/PoleShowOPOS.dll
Drawer1=FTCD1
Drawer=DLLS/DrawerOPOSes500.dll
DrawerOpenTimeOut=10
LeaveOnDrawerClose=Y
To Next Page
Loading...
