ParaBody 425103 - Page 9

9
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 7
STEP 7
• LOOSELY assemble one 4-1/2” PULLEY (43) to the TOP BOOM (17) using one 3/8 X 2-3/4” BOLT (85), two 3/8” FLANGE
SPACERS (49), and one 3/8” LOCK NUT (92). See FIGURE 7.
STEP 8
FIGURE 8
• LOOSELY assemble one 3-1/2” PULLEY (42) to the TOP BOOM (17) using one 3/8 X 2-1/4” BOLT (86), two 3/8” WASHERS
(91), and one 3/8” LOCK NUT (92). See FIGURE 8.
85 3/8 X 2-3/4”
86 3/8 X 2-1/4”
17
49
92
49
43
92
91
91
42
17