TELEPHONE AND ACCOUNT NUMBERS:
(reset empty)
If only one central station phone number is used, program the same number for telephone number 1 and 2.
[10] = the number "0" [BYP] = switch from pulse to tone while dialing
[11] =
*
[MEM] = pause 4 seconds
[12] = # [TRBL] = end of number
COMPUTER TELEPHONE NUMBER: (View at addresses 008 to 015.)
02 __ / __ / __ / __ / __ / __ / __ / __ 03 __ / __ / __ / __ / __ / __ / __ / __
1 234 56 78 910111213141516
CENTRAL STATION TELEPHONE NUMBER 1: (View at addresses 016 to 023.)
04 __ / __ / __ / __ / __ / __ / __ / __ 05 __ / __ / __ / __ / __ / __ / __ / __
12345678 910111213141516
CENTRAL STATION TELEPHONE NUMBER 2: (View at addresses 024 to 031.)
06 __ / __ / __ / __ / __ / __ / __ / __ 07 __ / __ / __ / __ / __ / __ / __ / __
1 234 56 78 910111213141516
ACCOUNT "A" AND "B": (View at addresses 032 to 035.)
08 ___ / ___ / ___ / ___ ___ / ___ / ___ / ___
123 4 567 8
AB
If only one account number is required, the same number must be entered for both account "A" and "B".
- 2 -
PG748EX
Press [
TRBL
] to end
phone
number if less
than 16 dig
its are
programmed.
Press [
TRBL
] to end
phone
number if less
than 16 dig
its are
programmed.
For 3 digit account
numbers, enter "skip"
([2
ND
]) as first digit.
Press [
TRBL
] to end
phone
number if less
than 16 dig
its are
programmed.
Streamline
section
Streamline
section
Streamline
section
Streamline
section
Streamline
section
Streamline
section
Streamline
section