Programming Page 15
* Requirement: To program “Flexible PGM deactivation” (option [8]) the
“PGM deactivation after option” (option [1]) must be ON.
RTX3 Remote Control Programming for EVO
IMPORTANT: The following section does not apply to DGP series keypads.
PGM5 [958] [959]
PGM6 [968] [969]
PGM7 [978] [979]
PGM8 [988] [989]
Default Data 005
OFF
The following options apply to sections [919], [929]... [989]:
Option
[1]: PGM deactivation after:
See table on right
Option [2]: PGM base time:
ON: Minutes
OFF: Seconds (default)
Option [8]: Flexible PGM deactivation*:
See table on right
Section Feature Details
[040] to
[043]
View or
Delete used
Remote
Controls
Each section includes 8 positions corresponding
to 8 remote controls programmed in the system
(the system enables up to 32 remote controls).
EXAMPLES: [040]: remote controls 1 to 8.
[043]: remote controls 25 to 32
To view/delete remote controls:
1. Enter a section
2. Select the remote control position
corresponding to the remote control to be
deleted
3. Press
[ENTER]. Any remote control position
displaying will be deleted
To Next Page
Loading...
