Need help?Do you have a question about the Paradox RTX3 and is the answer not in the manual?
General| Brand | Paradox |
|---|---|
| Model | RTX3 |
| Category | Computer Hardware |
| Language | English |
RTX3 is a 2-way, 32 zone wireless expansion module for EVO and Spectra SP control panels.
Details the key capabilities of the RTX3 module, including zone support, remote controls, and PGMs.
Shows the status of the module's LEDs for diagnostics and feedback.
Interface for updating the module's firmware via a serial connection.
Detects unauthorized opening of the module enclosure.
Used for programming Stand Alone RTX3 modules and system reset.
Connects a keypad for programming in Stand Alone mode.
Details how to connect the RTX3 to the control panel via the Combus.
Guidance on using relays for PGM1/PGM2 if current draw exceeds 150mA.
Instructions for connecting PGM3 and PGM4 to external power supplies.
Instructions for securing the antenna to the ANT terminal connector.
Restores RTX3 factory settings by pressing the Programming button.
Configuring RTX3 settings for Spectra SP panels via control panel programming sections.
Setting up RTX3 for EVO panels using a keypad or BabyWare PC software.
Steps to enter Module Programming mode on an EVO panel using a keypad.
Post-programming steps for zones, PGMs, sirens, and remote controls in EVO systems.
Details specific programming sections and options for RTX3 modules within EVO panels.
Configuration options for PGM activation, deactivation, and delay settings in EVO systems.
Guide to assigning and modifying remote control settings for EVO systems.
Configuration steps for using the RTX3 in a standalone operational mode.
To Next Page
