Need help?Do you have a question about the Paradox MG-RCV3 and is the answer not in the manual?
Provides criteria for selecting an optimal installation site to ensure good signal reception and avoid interference.
Details the physical steps for connecting and mounting the MG-RCV3 module.
Details how to program the MG-RCV3 module using a keypad for Spectra systems.
Details how to program the MG-RCV3 module using a keypad or WinLoad for Digiplex systems.
Provides detailed steps for assigning Spectra and Digiplex transmitters to the MG-RCV3.
Details how to check the signal strength of assigned transmitters using Spectra or Digiplex systems.
Explains how to enable/disable low battery supervision for transmitters on Spectra and Digiplex systems.
Details how to enable/disable check-in supervision for transmitters on Spectra and Digiplex systems.
Details the automatic learning method for assigning remote controls to the MG-RCV3 for Spectra and Digiplex systems.
Explains how to program individual buttons on remote controls for specific actions on Spectra and Digiplex systems.
General| Brand | Paradox |
|---|---|
| Model | MG-RCV3 |
| Category | Control Unit |
| Language | English |
To Next Page
