Paradox MG-RCV3 - Delete the Assigned Transmitters

10 Reference & Installation Manual
To activate a transmitter, insert the batteries and close the cover.
4.1.1 Delete the Assigned Transmitters
SPECTRA: SECTIONS [601] TO [608]
D
IGIPLEX SERIES: SECTIONS [101] TO [116]
Digiplex Series
Sections [101] to [116] represent inputs 001 to 016 respectively. For
example, section [101] is assigned to input 001 and section [102] is
assigned to input 002.
In step 5 in section 3.2 on page 8:
1. Enter a section number between [101] and [116].
2. Enter the 6-digit serial number of the transmitter.
How to delete the assigned transmitters:
Spectra
The transmitters assigned in sections [601] to [608] are deleted in
the same sections.
In step 3 in section 3.1 on page 8:
1. Enter a section number between [601] and [608].
2. Enter 6 zeros (000000) in place of the 6-digit serial number.
Digiplex Series
The transmitters assigned in sections [101] to [116] are deleted in
the same sections.
In step 5 in section 3.2 on page 8:
1. Enter a section number between [101] and [116].
2. Enter 6 zeros (000000) in place of the 6-digit serial number.
MGRCV3SD_EI01.fm Page 10 Thursday, May 5, 2005 2:22 PM