Paradox Digiplex EVO PRT3

PRT3 Printer Module:
ASCII Protocol Programming Instructions
We hope this product performs to your complete satisfaction. Should you have any
questions or comments, please visit www.paradox.com and send us your comments.

Paradox Digiplex EVO PRT3 Specifications

General

Type	Control Panel
Partitions	8
Power Supply	12V DC
Alarm Current	300 mA
Operating Temperature	-10°C to +55°C
Communication	GSM
Expandability	Yes
Humidity	non-condensing
Compatibility	Paradox devices
Input Voltage	9V - 15V DC

Summary

Serial Port Setup Configuration

Enable Serial Port

Configuration option to enable the serial port for home automation communication.

Baud Settings Configuration

Configuration for setting the serial port baud rate to match the home automation module.

Serial Port Usage Mode

Configuration option to set serial port usage for event reporting or home automation.

Home Automation Protocol Selection

Configuration to select the home automation protocol, such as ASCII.

Virtual Input Programming

Enabling Virtual Input Option

Configuration to enable or disable individual virtual inputs for system events.

Virtual Input Close Option

Virtual PGM Programming

Virtual PGM Deactivation Option

Virtual PGM Timers

Virtual PGM Activation Event

Virtual PGM Deactivation Event

ASCII Protocol

Request Area Label

Request User Label

Commands from Printer Module to Home Automation

System Events Description

Appendix 1: Programming PGMs

PGM Activation Event Configuration

PGM Deactivation Option Settings

PGM Deactivation Event