12 User’s Guide
2.5.11 Fire Zone Trouble [STAY]
When the [STAY] button illuminates, a wiring problem on the fire
zone is occurring.
2.5.12 Module Loss [BYP]
When a module is no longer communicating with your system, the
[
BYP] button illuminates.
2.5.13 Wireless Transmitter Supervision Loss [MEM]
When a wireless transmitter is no longer communicating with its
receiver or its batteries are disconnected, [
MEM] illuminates.
.
2.5.14 Keypad Fault [FORCE]
If for any reason your keypad is no longer communicating with
your alarm system, the keypad will emit four consecutive beeps
at 3-second intervals. Press any button on the keypad to
terminate the “beeping” sequence. The [
TBL] button will flash
and the [
FORCE] button will illuminate. When communication
has been restored, the keypad will resume its functions.
To view on which zones the Wireless Transmitters are
experiencing trouble, press the [
MEM] button after Step 2 from
the Trouble Display (see “How Do I Access the Trouble
Display?” at the beginning of section 2.3) (see Zone Display:
section 2.3).
1686EU04.fm Page 12 Tuesday, August 13, 2002 10:01 AM