Paradox Spectra 1686V - Trouble List (2.5.11 - 2.5.14)

12 User’s Guide
2.5.11 Fire Zone Trouble [STAY
]
When the [
STAY
] button illuminates, a wiring problem on the fire
zone is occurring.
2.5.12 Module Loss [
BYP
]
When a module is no longer communicating with your system, the
[
BYP
] button illuminates.
2.5.13 Wireless Transmitter Supervision Loss [
MEM
]
When a wireless transmitter is no longer communicating with its
receiver or its batteries are disconnected, [
MEM
] illuminates.
.
2.5.14 Keypad Fault [
FORCE
]
If for any reason your keypad is no longer communicating with
your alarm system, the keypad will emit four consecutive beeps
at 3-second intervals. Press any button on the keypad to
terminate the “beeping” sequence. The [
TBL
] button will flash
and the [
FORCE
] button will illuminate. When communication
has been restored, the keypad will resume its functions.
To view on which zones the Wireless Transmitters are
experiencing trouble, press the [
MEM
] button after Step 2 from
the Trouble Display (see “How Do I Access the Trouble
Display?” at the beginning of section 2.3) (see Zone Display:
section 2.3).