Paradox Spectra 1686V - How Do I Stay Arm?; 4.4.1 Instant Arming; 4.5 Force Arming

20 User’s Guide
also be activated using Auto-Arming (see section 4.9), a
Keyswitch (see section 4.8) or One-Touch Arming (see
section 4.7).
4.4.1 Instant Arming
After Stay Arming the system and during its Exit Delay, press
and hold the [
STAY
] button for 3 seconds. You should hear a
“
CONFIRMATION BEEP
”. The system is then Instant Armed.
Therefore, any armed zone that is breached will immediately
generate an alarm.
If you have access to both partitions:
4.5 F
ORCE
A
RMING
Force Arming allows you to rapidly arm the system without
waiting for all zones in the system to close. During Force
Arming, a Force Zone is considered “deactivated” until it
closes, then the system will arm that zone. Force Arming is
commonly used when a motion detector is protecting the
area occupied by a keypad. For example, when arming
To Instant Arm one partition
To Instant Arm both partitions
1) Press the [
STAY
] button 1) Press the [
STAY
] button
2) Enter your [
ACCESS CODE
] 2) Enter your [
ACCESS CODE
]
3) Choose a partition 3) Press [1]
4) Press the [
CLEAR
] button 4) Press [2]
5) Press and hold the [
STAY
]
button for 3 seconds
5) Press and hold the [
STAY
]
button for 3 seconds