Spectra LED Keypads 9
2.5 T
ROUBLE
D
ISPLAY
Your alarm system continuously monitors fourteen possible
trouble conditions. Most of these trouble conditions can be
reported directly to your security company. When a trouble
condition occurs, [
TBL
] will illuminate.
The keypad can be programmed to emit a “
BEEP” every
5 seconds whenever a new trouble condition has
occurred. Press the [
TRBL] button to stop the “Trouble
Beep”.
We strongly suggest that you inform your
Security Company of the trouble and allow them
to service your system.
How Do I Access the Trouble Display?
1) Press the [
TBL
] button
The [
TBL
] button will flash and any numbers corresponding to an
existing trouble condition will illuminate.
2) Read the corresponding explanation of the trouble
from the Trouble List. If no repair instructions are
given, contact your Security Company for repairs.
3) Press the [
CLEAR
] button to exit
To Next Page
Loading...
Need help?
General
