28 User’s Guide
5.5 PGM B
UTTON
(P
ROGRAMMABLE
O
UTPUTS
)
Your Spectra system may include one or more
programmable outputs (PGMs). When a specific event or
condition occurs in the system, the PGM can be used to
reset smoke detectors, activate light switches in your home
or office, open/close garage doors and much more. A PGM
can also be programmed to activate whenever the [
PG
]
button is pressed and held for 3 seconds.
5.6 Q
UICK
F
UNCTION
K
EYS
Upon request of your installer or Security Company you
may have to perform one of the following. Press:
5.6.1 T
EST
R
EPORT
[
ENTER
] + [
MASTER
CODE
] + [
MEM
]
If your system is monitored by your Security Company, this
feature will send a test report code to the Security Company.
5.6.2 C
ALL
PC
[
ENTER
] + [
MASTER
CODE
] + [
BYP
]
Will initiate a call to the Security Company that is using the
upload/download diagnostic software.
5.6.3 Answer PC
[
ENTER
] + [
MASTER
CODE
] + [
FORCE
]
Will force your security system to answer a call made by your
Security Company that is using the upload/download
diagnostic software.
To Next Page
Loading...
