26 User’s Guide
Each keypad must be Chime Programmed and Muted
separately. Keypad Chimes and Muting must be re-
programmed if your system suffers a total power loss.
When you press and hold a button and the keypad
emits a “C
ONFIRMATION BEEP”, the chime feature
has been enabled for that zone or Keypad Muting
has been enabled for that keypad. If the keypad
emits a “R
EJECTION BEEP”, these features have
been disabled.
5.1 P
ROGRAMMING
C
HIME
Z
ONES
This feature allows you to program which zones will be
“Chime Enabled”. A “Chime Enabled” zone will advise you
every time it is opened by causing your keypad to emit a
rapid intermittent beep tone (
BEEP-BEEP-BEEP-BEEP). Press
and hold any button from [1] to [10] for 3 seconds to
activate or deactivate Chiming for zones 1 to 10. For
example, press and hold the [1] button to enable chiming
on zone 1.
5.2 K
EYPAD
M
UTING
Press and hold the
[
CLEAR
]
button for 3 seconds to enable
or disable keypad muting. When muted, the keypad will
only emit the “C
ONFIRMATION
B
EEP
”, “R
EJECTION
B
EEP
”, and
beep when a button is pressed.
To Next Page
Loading...
Need help?
General
