Programming:
STEP KEY DESCRIPTION
1. RESET Clears control’s memory. Control is finished initializing when # stops flashing
(about 6 seconds).
2. NEXT Display shows MAINtAin (maintained relay operation).
3. + Toggle to MOMENTARY (momentary relay operation).
4. PROGRAM Display shows TIME header.
5. NEXT,+,- Use these keys to set time, date and daylight savings time information.
6. PROGRAM Press PROGRAM key to step through headers until ASTR (astro header) is
reached.
7. NEXT Sunrise time is displayed with hours flashing.
8. +/- Set to today’s sunrise hour.
9. NEXT Sunrise minutes are flashing.
10. +/- Set to today’s sunrise minutes.
11. NEXT Sunset time is displayed with hours flashing.
12. +/- Set to today’s sunset hour.
13. NEXT Sunset minutes are flashing.
14. +/- Set to today’s sunset minutes.
15. NEXT LATT N-10o is displayed (latitude 10˚ north).
16. +/- Roll to the desired latitude.
17. NEXT Displays CHAN 1 NO.
41
To Next Page
Loading...
