Parasound Zpre2 - Technical Specifications; Audio and Video Performance Metrics; Input, Output, and Tone Control Ranges; Power, Dimensions, and Accessories

PARASOUND ZPRE2 SPECIFICATIONS
Frequency Response – Audio
10 Hz - 100 kHz, +0/-3 dB
10 Hz - 50 kHz, +0/-0.8 dB
Frequency Bandwidth – Composite Video
10 MHz
Total Harmonic Distortion
0.006%
S/N Ratio
112 dB, input shorted, IHF A-weighted
92 dB, input shorted, unweighted
Input Impedance
15 k
Ω
Input Sensitivity
150 mV for 1 V output
Maximum Output: 7.6 V
Crosstalk
83 dB at 1 kHz
76 dB at 20 kHz
Tone Controls
Bass +/- 8 dB at 100 Hz
Treble +/- 10 dB at 10 kHz
AC Power Requirement
110 - 120 V / 220 -240 V, 50 - 60 Hz
2 watt standby; 20 watts when turned on
Dimensions
9
1
⁄
1
⁄
1
2
⁄2⁄
”
Wide
10
”
Deep with connectors
2
”
High with feet, 1
3
⁄
3
⁄
3
4
⁄4⁄
”
panel only
241 x 254 x 50mm, 44.1mm panel only
Net Weight
4.6 lbs, 2.1 kg
Rack Mount Accessory
May be Purchased Separately
SBS: Bracket and bolts to attach any two
Z Custom units side-by-side in a standard
19” equipment rack.
Zblank: 9
1
⁄
1
⁄
1
2
⁄2⁄
”
x 1
3
⁄
3
⁄
3
4
⁄4⁄
”
blank panel, required
to mount a single Zpre2 unit; Zblank kit
includes one SBS.
Specifications and features subject to change
or improvement without notice.
12