Parker 890 - Page 402

Programming
Page D-58 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Parameter Descriptions
TIMEOUT
PREF: 29.07 Default: 600.0 s Range: 0.0 to 600.0 s
Determines the maximum amount of time the sequence is allowed to remain in the low frequency injection braking state.
BASE VOLTS
PREF: 29.08 Default: 100.00 % Range: 0.00 to 115.47 %
Determines the maximum volts at base speed applied to the motor during injection braking.
ACTIVE
PREF: 29.09 Default: FALSE Range: FALSE / TRUE
Indicates the state of the Drive. TRUE when injection braking.