10
Instruction Manual
Compact EHA
Bulletin HY22-3200B
Parker Hannifin
Oildyne Division
EC Declaration of Incorporation.
Manufacturer’s Name: Parker Hannin Corporation
Manufacturer’s Address: Oildyne Division
5520 Highway 169 North
New Hope, MN 55428 USA
Declare that the partially complete machinery described below conforms to applicable health and safety requirements of
Part 1 of Annex 1 of Machinery Directive 2006/42/EC taking full account of requirements for pressure equipment. This
partly completed machinery must not be put into service until the machinery into which it is to be incorporated has been
declared in conformity with the provisions of the Machinery Directive. Condential technical documentation has been
compiled as described in Part B of Annex VII of Machinery Directive 2006/42/EC and is available to European national
authorities on written request. If a request is received documentation will be transmitted either electronically or by post.
Description: Compact Electro-Hydraulic Actuator (EHA)
Model Number: All
Sizes: All
Serial Number: All
The following standards have either been referred to or complied with in part or in full as relevant:
ENISO 12100 – 2 Machinery Safety - Basic concepts, general principles for design
– Part 2: Technical principles and specications.
EN13849 Machinery Safety - Safety Related Parts of Control Systems – Part 1: General
Principles for Design.
EN 982:1996 Machinery Safety - Safety requirements for uid power systems and their
components – Hydraulics.
Full Name of responsible person Van Mancuso
Place of signing:
Parker Hannin Corporation
Oildyne Division Position General Manager
5520 Highway 169 North
New Hope, MN 55428 USA
Signature Date March 17, 2011
Full Name of Authorized European Representative Stephen Fryer
Place of signing:
Parker Hannin Ltd.
Cylinder Division Europe Position General Manager, Cylinder Division Europe
6 Greycaine Road,
Watford, Hertfordshire. WD24 7QA, UK
Signature Date March 17, 2011
Declaration of Incorporation
To Next Page
Loading...
