Need help?Do you have a question about the Parker ET Series and is the answer not in the manual?
General| Series | ET |
|---|---|
| Power Supply | 24 VDC |
| Protection Class | IP20 |
| Type | Controller |
| Digital Outputs | 4 |
| Analog Outputs | 2 |
Provides a detailed breakdown of the model code structure for ordering ET Series actuators.
Provides a visual representation of actuator components and their associated part numbers.
Lists common part numbers for various ET Series actuator models.
Provides torque specifications for various components of the ET Series actuators.
Step-by-step procedure for adjusting the timing belt tension on ET Series actuators.
Details the procedure for setting motor coupler and pulley spacing.
Provides pinout information for various servo system connectors.
Details pinout configurations for APEX10, APEX20, and APEX40 drives/controllers.
Pinout for APEX control connections via 13-pin removable connector.
Pinouts for APEX motor and encoder connections.
Pinout for the 25-Pin D socket I/O connector for PDX Drive/Indexer control.
Provides wiring information for standard stepper motors.
Details the electrical and operating specifications for Hall Effect sensors.
Provides an overview of Reed Switch sensors and their features.
Specifications for low amp reed switches SMR-1L and SML-1L.
To Next Page