Parker N2 NITROSource Compact N2C-2 - Receiving and Inspecting the Equipment

RECEIVING AND INSPECTING THE EQUIPMENT
 e equipment is supplied in a sturdy wooden crate designed to be moved using a forklift truck or pallet truck. Refer to the
technical speci cation for packed weights and dimensions.
On delivery of the equipment check the crate and its contents for damage and verify that the following items have been included:
If there are an signs of damage to the crate, or there are any parts missing please inform the delivery company immediately and contact
your local Parker o ce.
STORAGE
 e equipment should be stored, within the packing crate, in a clean dry environment. If the crate is stored in an area where the
environmental conditions fall outside of those speci ed in the technical speci cation, it should be moved to its  nal location (installation
site) and le to stabilise prior to unpacking. Failure to do this could cause condensing humidity and potential failure of the equipment.
REF DESCRIPTION QTY
AOP010
Access Key
½ ” Ball Valve
½ ” 3-Way Ball Valve
1
3
1
1
1
3
2
4
08
N Compact Nitrogen Gas Generator - User Guide. ©2020.