Parker PROFINET AC20 Series - Configure Process Data Mapping; Option 1: Using AC20 Mapping Tables

DOC-0017-10-EN: AC20 Series PROFINET IO Option
28 (47) DOC-0017-10-EN-A 27.03.2023
Configure Process Data Mapping
Option 1: Using AC20 Input and output mapping tables
• The parameter 2566 MASTERMAPPING must be set to FALSE to prevent the PLC from
overwriting the mapping.
• Through the mapping tables from the keypad, DSE Lite or Webserver, add parameter numbers
into the appropriate table.
Note: If the first row of a table (input mapping or Output mapping) is empty or equal to 0, the table
will not be accessible and configurable from PLC.
• In Tia portal drag and drop the appropriate input and output modules from device catalogue to the
AC20 slot then define the variable name.
•